P5417089
17
5.1.7 Comfort Setting
This function is used to control cooling of the discharged air when in the cooling mode.
1
Select “Comfort Setting” from the “Menu”
and press “OK”. The “Comfort Setting”
screen is displayed.
OK
Back/Hel
OK
Back/Hel
Menu
Function 10
Sav/reduction Schedule
Comfort Setting
Quick Function
02
/
05
Operation Noise Reduction
15:10(Fri)
Entr RtrnSel.
Back
OK
2
By pressing “ ” or “ ” the Comfort
Setting Mode changes as follows :
OFF ↔ LOW ↔ MED ↔ HIGH
Select the “Control Cool Air” level and
press “OK”.
OK
Back/Hel
OK
Back/Hel
Back
OK
Comfort Setting
Control Cool Air
OFF
Entr RtrnAdj.
3
The setting conrmation screen is
displayed. Select “Yes” with “ ” or “ ”
and press “OK” to conrm the setting.
The screen returns to normal mode.
OK
Back/Hel
OK
Back/Hel
Back
OK
Comfort Setting
Yes No
Sel. Entr Rtrn
Set comfort setting?
NOTE
● The cool air level order is as follows:
“HIGH” > “MED” > “LOW” and the temperature of the discharged air is high.
● It is possible the operation may not function if there are more than two units operating.
● When this function is set, it may take time for the entire room to cool down.
To Next Page
Loading...
Need help?
General
