Johnson Controls TIWM018B22S - Page 6

2
P5417089
● Before servicing, turn-OFF the power source and use accepted lockout and tag out procedures at all main
switches.
● This unit is pressurized. Never loosen threaded joints while the system is under pressure and never open
pressurized system parts.
● Johnson Controls will not assume any liability for injuries or damage caused by not following steps outlined or
described in this manual. Unauthorized modications to Johnson Controls products are prohibited as they…
◦ May create hazards that could result in death, serious injury, equipment damage or property damage;
◦ Will void product warranties;
◦ May invalidate product regulatory certications;
◦ May violate OSHA standards;