P5417089
23
2
Point the transmitter portion of wireless
controller towards the receiver and press
“On ” switch.
When the transmitting indicator “
”
ashes, the indicator “
” (orange) on
indoor unit is turned ON and the beep
sound is heard. The operation is started.
NOTE:
Do not press “On ” and “Off ” switches
repeatedly (within 3 seconds). If the switch is
pressed frequently, the wireless controller may
not work correctly.
Temperature, Fan Speed and Airow Direction Setting
● To set the temperature, fan speed and airow direction, refer to Section 5.2.2 “Temperature, Fan Speed
and Airow Direction Setting”.
Stop
Point the transmitter towards the receiver and press
“Off ” switch.
The indicator “ ” (orange) on the indoor unit
is turned OFF and the beep sound is heard.
The
indications of setting temperature, fan speed, and airow
angle are turned OFF.
The operation is stopped.
The indications of setting
temperature, fan speed, and
airow angle are turned OFF.
● The indoor unit fan may continue to operate for up to 2 minutes following the heating cycle to dissipate
residual heat from the indoor unit.