26
P5417089
● Adjusting Vertical Blade
Adjust the vertical blade by hand as shown below.
● Automatic Louver Setting
The swing louver is stopped and moved by controlling the wireless controller.
The louver automatically closes when the unit is stopped from the wireless controller.
● Louver Angle during Cooling and Dry Operation
The louver angle self-adjusts from its default setting during times of cooling and dry conditions to
prevent condensation buildup. Louver angle changes are not shown on the LCD of wireless controller.
● Louver Angle during Heating Operation
The louver angle self-adjusts for the heating conditions.
Do not attempt to move the louver by hand as this will damage the automatic louver setting function.
* When the heating operation starts
* When the defrost operation starts
The louver is at a
15-degree angle.
15
o
When the discharge
temperature is higher
than 86°F (30°C), the
louver angle automatically
returns to the setting on
the wired controller.
Above louver angle changes are not shown on the LCD of the wireless
controller.
TIWM006B22S
~
TIWM012B22S TIWM015B22S ~ TIWM030B22S
Louver
rtical Blade
Louver
Louver
To Next Page
Loading...
Need help?
General
