Johnson Controls Tyco PowerSeries Pro User Manual

Chapter 4
4.1.2 Stay Arming the System
Stay mode partially activates the alarm system by:
l Arming all perimeter sensors
l Bypassing all interior sensors
Arm the System in Stay mode LCD Display
1. Ensure all windows and doors are closed and that the Ready indic-
ator is on.
Date Time
JAN 02/18 2:06a
2. Press and hold the Stay key for 2 seconds and, if required, enter the
access code or present a proximity tag. Do not leave the premises.
System is
Ready to Arm
then
Present Tag or
Enter Code
If zones have been bypassed, a warning message appears.
3. Once arming is initiated, the system does the following:
l Armed indicator turns on.
l Ready indicator remains lit.
l Exit Delay timer begins counting down.
Exit Delay in
Progress
4. To cancel the arming sequence, enter the access code or present a
proximity tag.
System Disarmed
No Alarm Memory
5. Once the exit delay timer expires, the system is armedThe system
does the following:
l
Ready indicator turns off.
l
Armed indicator remains on.
l Bypass or system indicator activates.
System Armed
in Stay Mode
4.2 Arming the System with a 2-Way Wireless Key
If configured, the PowerSeries Pro system can be armed using the wireless keys provided with your
alarm system. To Arm the system with a 2-way wireless key, press the desired Arming mode button when
the system Ready indicator is on.
4.3 Arming the System with a Proximity Tag
Proximity tags can be used to arm/disarm the system or to perform a programmed function (e.g. used in
place of entering an access code or to unlock a storage room door).
To Arm the system with a proximity tag
l Present your proximity tag to a keypad with a proximity sensor when the system Ready indicator
is on.
l If configured by your installer, enter your access code.
NOTE: When arming with a proximity tag, the system arms in Away mode if you exit the premises. The
system arms in Stay mode if a motion sensor is installed and you don't exit the premises.
4.4 Stay Arming the System
Stay mode partially activates the alarm system by:
l Arming all perimeter sensors.
l Bypassing all interior sensors.
To Arm the System in Stay Mode LCD Display
1. Ensure all windows and doors are closed and that the Ready indic-
ator is on.
Date Time
JAN 02/18 2:06a
- 10 -

Johnson Controls Tyco PowerSeries Pro Specifications

General

Brand	Johnson Controls
Model	Tyco PowerSeries Pro
Category	Security System
Language	English