1.0 Quick Reference 4
2.0 Safety Instructions 6
3.0 The PowerSeries Pro Security System 7
3.1 General System Operation 7
3.2 Carbon Monoxide Detection 7
3.3 Fire Detection 7
3.4 Testing the System 7
3.5 Monitoring 8
3.6 Maintenance 8
3.7 Applicable Models 8
4.0 Securing the Premises 9
4.1 Arming the System 9
4.1.1 Away Arming the System with the Keypad 9
4.1.2 Stay Arming the System 10
4.2 Arming the System with a 2-Way Wireless Key 10
4.3 Arming the System with a Proximity Tag 10
4.4 Stay Arming the System 10
4.4.1 Silent Exit Delay 11
4.5 Night Arming 11
4.6 No-Entry Arming 12
4.7 Exit Delay Time Restart 12
4.8 Leaving when the System is Already Armed - Quick Exit 12
4.9 Bypassing Zones 12
4.9.1 Additional Bypass Features 13
4.10 Bypass Groups 14
4.11 Arming Troubles and Exit Faults 15
4.11.1 Arming Troubles 15
4.11.2 Audible Exit Faults 15
4.11.3 To Correct an Exit Fault 15
4.12 Disarming the System 16
4.12.1 Disarming Error 16
5.0 Alarms 17
5.1 Emergency Keys 17
5.2 Fire Alarm 17
5.3 Resetting Smoke Detectors 17
5.4 Carbon Monoxide Alarm - 4 beeps, long pause, 4 beeps 17
5.5 Intrusion (Burglary) Alarm - Continuous Siren 18
5.6 Alarm Cancel Window 18
5.7 Viewing Alarms in Memory 18
5.7.1 Alarm Messages 18
6.0 Wireless Keys 19
6.1 Using 2-way Wireless Keys 19
6.2 Using Proximity Tags 19
7.0 Managing Users 20
7.1 Access Code Types 20
7.1.1 Adding, Changing and Deleting Access Codes 21
7.1.2 Enrolling and Deleting Proximity Tags 21
7.1.3 Naming a User 22
7.1.4 Assigning a Partition to a User Code 22
7.2 Configuring Additional User Options 23
8.0 User Functions [Ù][6] 24
8.1 Event Buffer 24
8.2 Setting the Time and Date 24
8.3 Enabling/Disabling the Auto Arm/Disarm Feature 24
8.4 Setting the Auto Arm Time 25
8.5 Allowing the Installer to Service your System Remotely - DLS 25
8.6 User Callup 25
8.7 Late to Open 25
8.8 Changing the Brightness of the LCD keypad 26
8.9 Changing the Contrast of the LCD keypad 26
8.10 Setting the Buzzer volume 26
- 2 -
Chapter 2
To Next Page
Loading...
Need help?
General
