Johnson Controls Tyco PowerSeries Pro User Manual

Chapter 9
P Partition auto arm pre-alert
N Partition is not ready to be armed
Keypads can also be configured as global keypads, controlling all partitions. Global keypads must be
configured by your installer.
9.2 Fire and CO Zone Types
l If a Fire zone generates an alarm only the partition the fire zone is assigned to will go into alarm.
Other partitions retain their current state.
l If the [F] key on a global keypad is used to generate an alarm all enabled partitions will go into
alarm.
l One or more fire zones may be located on any partition.
l On alarm, the fire auto-scroll display appears on all partition keypads and on all global keypads.
Fire alarm silence and fire system reset may be done directly on any partition keypad. To silence
a fire or CO alarm from a global keypad requires that the global keypad be loaned to one of the
partitions.
- 30 -

Johnson Controls Tyco PowerSeries Pro Specifications

General

Brand	Johnson Controls
Model	Tyco PowerSeries Pro
Category	Security System
Language	English