JR X9303 - X9303 2.4 USED AS SLAVE (STUDENT) - (Trainer System)

H-45
X9303 2.4 USED AS SLAVE (STUDENT) – (Trainer System)
Highlight and select MASTER and the display will switch
to SLAVE. A message will appear instructing to Connect
DSC & POWER off. Make sure the transmitter power
switch is in the OFF position and the DSC cord is
connected between the 2 transmitters.
The X9303 2.4 is now ready to be used as the Slave
or student transmitter.
[Trainer]
SLAVE Connect DSC & POWER off