Data Reset – RESET THE MODEL
H-5
When setting up a new model it is important to reset
all parameters to their default or factory settings before
proceeding with any other programming. This is to ensure
that there are no program mixes, trims or other surprises
left over from a previous model or programming session.
If you are setting up a model for the first time, you can
skip this step and move to the TYPE SELECT function.
1. In the SYSTEM Menu, highlight and select MDL
Reset using the Selector.
2. Press the CLR button that is next to RES
on the display.
3. Press the lowermost button next to YES on the display
to reset all data for this model.
4. Return to the SYSTEM Menu by pressing the
LIST button.
[MDL Reset]
LST
NO
YES
MODEL 3 HELI
Are you sure? Y/N
To Next Page
Loading...
