Type Select – TO ACTIVATE THE HELI MODE
MDL Name-ENTER A NAME FOR THE MODEL
H-6
1. In the SYSTEM Menu, highlight and select Type
SEL using the Selector.
2. Highlight and select HELI using the Selector.
Each model should be given a name to make it easy
to identify in the model number list and to identify the
current model on the main display screen. The model
name appears in the upper right-hand corner of the main
screen when the transmitter is switched on.
3. Return to the SYSTEM Menu by pressing the
LIST button.
1. In the SYSTEM Menu, highlight and select MDL
Name using the Selector.
2. Highlight and select the desired characters to form the
model name.
After having selected and reset the desired model number
to be programmed, it is time to tell the transmitter that the
Heli Mode is to be used for this helicopter.
3. Return to the SYSTEM Menu by pressing the
LIST button.
[Type SEL] MODEL 3 HELI
GLID ACRO HELI
MODEL 3 HELI <VIBE 50>
[MDL Name]
To Next Page
Loading...
Need help?
General
