3.5.4 Preset Timing
The following table shows factory preset analog signal timing:
Attention
• Display position may be divergent depending on the PC connected, which may require screen adjustment using
Adjustment menu.
• If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen
display may still be incorrect even after the adjustment.
• When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the
Adjustment menu.
FDS1904 / FDS1904T
FDU2603W / FDU2603WT
35 | Operation
To Next Page
Loading...
General