2.5.1.7 ROT Settings (ROT SET)
The purpose of ROT Damping is to dampen the result on the screen when the ship is unstable.
Figure 29: ROT Damping Menu
To set up the ROT Damping settings, execute the following procedure:
1. In the MENU touch the ROT SET button.
The ROT DAMPING MENU appears, see Figure 29: ROT Damping Menu on page 36.
2. Set DAMPING to DISABLED or ENABLED by touching the + or – buttons.
3. Set the DAMPING TIME by touching the + or – buttons.
INFO: Set the DAMPING TIME to 1 - 10 seconds for sea application.
4. Touch the
√
button to confirm the chosen setting.
The MENU appears again.
36 | Operation
To Next Page
Loading...
