JRC J-Marine NeCST - Page 270

5-5
Contents
Cause
Action
displayed correctly.
Not output from VDR or SLC.
Check the status of VDR or SLC.
The Web server of the data
processing unit is not activated.
Turn off all power supplies of this
product and turn on power supplies in
the following order.
1. Data processing unit
2. Touch Panel Display unit
3. Display processing unit
There is a problem in the data
processing unit.
Request repairs to the distributor.
Wind direction/wind
speed (digital
anemoscope/anemo
meter) is not
displayed.
Communication is not set
correctly.
Request setting to the distributor.
The power supply for the digital
anemoscope/anemometer is not
turned on.
Turn on the power supply for the
digital anemoscope/anemometer.
Not output from VDR or SLC.
Check the status of VDR or SLC.
The Web server of the data
processing unit is not activated.
Turn off all power supplies of this
product and turn on power supplies in
the following order.
1. Data processing unit
2. Touch Panel Display unit
3. Display processing unit
There is a problem in the data
processing unit.
Request repairs to the distributor.
Water depth values
are not displayed.
Communication is not set
correctly.
Request setting to the distributor.
The power supply for the echo
sounder is not turned on.
Turn on the power supply for the echo
sounder.
Not output from VDR or SLC.
Check the status of VDR or SLC.
The Web server of the data
processing unit is not activated.
Turn off all power supplies of this
product and turn on power supplies in
the following order.
1. Data processing unit
2. Touch Panel Display unit
3. Display processing unit
There is a problem in the data
processing unit.
Request repairs to the distributor.
User chart and route
file which is made by
NeCST are not able
to import to
JAN-901B/701B
Communication is not set
correctly.
Request setting to the distributor.
The Web server of the data
processing unit is not activated.
Turn off all power supplies of this
product and turn on power supplies in
the following order.
1. Data processing unit
2. Touch Panel Display unit
3. Display processing unit
There is a problem in the data
processing unit.
Request repairs to the distributor.
There is a problem in the internal
wiring.
Request repairs to the distributor.
There is an error of setting
JAN-901B/701B share folder.
Set JAN-901B/701B share folder
correctly.
UPS does not
function.
There is a problem in the
connection with the UPS.
Check the connection with the UPS.
The UPS is not set correctly.
Set the UPS correctly.