JRC JHS-183 - Data Mismatch and Power Off Procedures

5-3
ALARM
DATA MISMATCH
[
MMSI
/
IMO
/
SHIP
/
VSD
]
INITIAL SETTING REQ.
RESTART MAINTENANCE
MODE.PRESS AND HOLD
[
PWR
/
CONT
]
+
[
DIM
]
a) The voyage static data mismatch
When only voyage data is different, it is displayed as follows.
When [OK] is selected, voyage static data setting screen is displayed.
When [CANCEL] is selected, LIST SORT screen is displayed.
Confirms the voyage data and select [ENT].
Refer to 5.3.1 VOYAGE DATA SETTING for the change of the setting and the operating method.
b) Other data mismatching
When the following item is displayed, press and hold PWR/CONT and DIM keys together until the
power is turned off (refer to 5.2.2).
- SHIP STATIC DATA
- MMSI / IMO NO.
- MMSI SETTING : 000000000
According to the information screen, contact our service center or agents.
Example) Ship static data, MMSI/IMO No., Voyage static data mismatching
Different contents are displayed.
Press and hold PWR/CONT and DIM keys together in order
to turn off the power.
Select [CANCEL], LIST
SORT screen is
displayed.
Select [OK], VOYAGE DATA
screen is displayed.
VSD RECONFIG
DATA MISMATCH
[
VOYAGE DATA
]
RECONFIGURE
?
[
OK
]
[
CANCEL
]
LIST SORT:RANGE
BRG
°
RNG
NM
ET
m
in NAME
219 0.20 1 SART
152 0.44 2 JRC0>
192 1.30 3 JRC0>
72 1.46 0 TOKY>
▼ 215 3.64 5 AICH>
2
/
200
V O YAGE DATA
1 .NAV.STATUS:
ENGAGED IN F ISHING
2 .DESTINATION :
JAPAN
3 .ETA:
▼
12/30 12:23
1/3