JRC JHS-183 - Displays

4-1
LIST SORT:RANGE
BRG
°
RNG
NM
ET
m
in NAME
219 0.20 1 SART
152 0.44 2 JRC0>
192 1.30 3 JRC0>
72 1.46 0 TOKY>
▼ 215 3.64 5 AICH>
2
/
200
G
GL
TxA 1W
AL
4. DISPLAYS
TxA/TxB/RX Transmission condition
When AIS is transmitting, TxA or TxB is displayed.
When AIS operates in Silent Mode, RX is displayed.
1W Power reduction
When the transmission Power is reduced to 1W, the mark is displayed.
AIS Alarm
When an alarm occurs during operation, this mark flashes, this mark is flashed.
If CLR key is pressed or external equipment outputs the ACK of this alarm,
This mark is changed from flashing to being permanently on.
When the alarm condition returns to normal, the mark is turned off.
Received message indication
When a message is received, this mark is displayed and buzzer sounds.
A
fter opening the message, this mark is turned off.
Long range message
When a long range (LR) message is received, this mark is displayed.
Guard zone Alarm
When the guard zone alarm occurs, this mark is displayed.
＊GROUP SHIP
When AIS has received the other ships
data that is registered as group ships in the
AIS, then this mark is displayed.
Screen Title
Indicates the screen’s content
The display order of other ships
Indicates the order dis
p
la
y
ed at the LIST SORT screen.
Operation indicator
Indicates the equipment condition.
When these 4 squares are flashing in order, it means normal condition.
▲/▼ Arrow indication
If there are ▲ or ▼ mark,
It means the screen continues.
Guard mark indication
When other ships enter the guard zone,
this mark is displayed and alarm buzzer sounds.
Main display
Displays “Other ship’s list”, “Other ship’s
detail”, ”Own ship’s detail”, “Menu
display”, ”Graphic display” and so on.
Status bar
Displays “equipment condition”, “the
number of other ships” and so on.