JRC JHS-183 - Numerical Input

5-14
5.2.5 Numerical Input
The procedure for numerical input is as follows:
The following is inputting a draught value to explain the procedure.
When CLR or left key is pressed, the cursor is moved back to 1 digit left position.
4. DRAUGHT:
(
Cursor
)
e.g.) DRAUGHT: 12.3 m
(The draught has been set.)
(Select ‘1’)
(Select ‘2’)
(Select ‘3’）
1 0.0 m 1 2 .0 m
12. 3 m
ENT or
Right key
ENT or
Right key
ENT or
Right key
ENT
Up
down
key
Up
down
key
Up
down
key