JRC JHS-183 - Regional Channel; Power Reduction; Registration of Group Ships (GROUP SHIP)

5-57
5.3.4.4 Power Reduction
Select 4. POWER REDUCT, the transmission power can be set.
Select from “NORMAL” and “1W” with ▲ key
or ▼ key and press ENT to determine.
NORMAL ･･･ transmit by normal power
1W ････ the power is changed to 1W
While selecting 1W, there is 1W mark on the
bottom line of screen. (as shown below)
Caution：If the transmission power is changed into 1W, the power revert to normal after moving
0.25 NM from the position where the power reduction was made.
5.3.4.5 Registration of Group Ships (GROUP SHIP)
Select 5.GROUP SHIP, GROUP SHIP screen is displayed.
Other ships registered as group ship are displayed as appended “＊” mark on the left side in LIST
SORT screen and the registered ship name.
The number of registration is up to 10.
These registrations can be confirmed with ▲ key or ▼ key.
SET UP
1.DATE&TIME
2.MY CONTROLLER
3.REGIONAL CHANNEL
4.PWR REDUCT:NORMAL
5.GROUP SHIP
6.CHANNEL
/
POWER SET
▼
LIST SORT:RANGE
BRG
°
RNG
NM
ET
m
in NAME
219 0.20 1 SART
152 0.44 2 JRC0>
192 1.30 3 JRC0>
72 1.46 0 TOKY>
▼ 215 3.64 5 AICH>
2
/
200
1w
GROUP SHIP
1.
SHIP NAME:
MMSI:
000000000
1
/
10