JRC JHS-183 - Persons on Board Input; Ship Type U.S

5-19
5.3.1.5 Persons on Board Input
Select 5. PERSONS ON BOARD at “VOYAGE DATA” menu screen (refer to “5.3.1 VOYAGE DATA
SETTING”), the number of persons on board can be inputted.
Input a value with ▲ key or ▼ key according to the procedure of ”5.2.5 Numerical Input”. The input
range of PERSONS is between 0 and 9999.
When the inputted number is more than “8191”, “8191 OR MORE” is displayed.
5.PERSONS ON BOARD :
8191
After pressing ENT key and the draught value has been set. Then the cursor moves to the next item
“6.SHIP TYPE U.S.”.
5.3.1.6 Ship type U.S.
When 6.SHIP TYPE U.S. is selected, ship types is ready to be selected.
Press the▲ key or ▼ key and select the “ON” or “OFF”.
When "ON" is selected, the ship types are changed to US coast guard' from 'international'.
When "OFF" is selected, the ship types are changed to ' international' from US coast guard '.
If the ENT key is pressed, the selection is made and the cursor moves to the next item ”7. Type of
ship/cargo”.
OFF : International
ON : US
6.SHIP TYPE U.S. :OFF
Ship types for U.S.