Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
4-47
4
NSTALLATION MANUAL
GPSSingle : Fix a position only with single GPS. Does not perform fixing with
SBAS or beacon.
SBAS : Fix a position with SBAS or single GPS. Does not perform fixing
with beacon.
Beacon : Fix a position with beacon or single GPS. Does not perform fixing
with SBAS.
AUTO : The optimum setting is selected from single GPS, SBAS and
beacon.
Fix Mode Setting
Set the GPS fix mode.
1 Open GPS Setting - Fix Mode .
"Fix Mode" menu appears.
After setting, open "8. Send Data", and send the setting to the GPS receiver.
2D : 2D positioning can be done with height acquired.
3D : 3D positioning can be done with height acquired.
AUTO : 2D positioning and 3D positioning can automatically be selected with
optimum.
Elevate Mask Setting
Limits the satellite to be used with elevation angle.
1 Open GPS Setting - Elevate Mask .
"Elevate Mask" menu appears.
Press the cursor key or turn the [MULTI] control to set the elevate mask.
The elevate mask can be set between 5 and 89°.
After setting, open "8. Send Data", and send the setting to the GPS receiver.