JRC JMA-7725-6 - Selecting Display Mode [MAP]

3
3 – 42
3.3
3.3.22 Selecting Display Mode [MAP]
This function is used to select the radar, R+P (radar + plotter) or plotter (optional) mode.
Procedures
Procedures
Press the
MAP
key to select the radar, radar + plotter or plotter mode.
The R+P (radar + plotter) mode cannot be selected unless both GPS and gyro are installed.
The available motion modes in R+P mode are NUP and CUP only in the TM/CTM mode.
The plotter mode cannot be selected unless the plotter is installed and transmission is stopped.