JRC JMA-7725-6 - Background Color

3 – 11
3.2
3.2.8.1 Background Color
Procedures
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
1
key to open the RADAR #1 menu.
3. Press the
7
key to open the BACKGROUND menu.
4. Press the
1
key to select the background color inside the bearing
scale. (Radar area)
Two colors, including black, are available.
Press the
1
key to select the color for DAY1 and press the
ENT
key.
Press the
1
key again to select the color for DAY2 and press the
ENT
key.
Select the colors for NIGHT1 and 2 in the same way.
5. Press the
2
key to select the background color outside the bearing
scale.
Two colors, including black, are available.
Press the
2
key to select the color for DAY1 and press the
ENT
key.
Press the
2
key again to select the color for DAY2 and press the
ENT
key.
Select the colors for NIGHT1 and 2 in the same way.
6. Press the
SUB
MENU
key.
Background
1. RADAR AREA DAY1: BLK BLU
DAY2: BLK
BLU
NIGHT1:
BLK BLU
NIGHT2
BLK BLU
2. OUTSIDE OF RADAR AREA
DAY1: BLK SKY
DAY2: BLK
SKY
NIGHT1: BLK
SKY
NIGHT2: BLK
SKY
BACK
GROUND
0. PREV
9. NEXT