JRC JMA-7725-6 User Manual

8
8 – 2
8.1
8.1.2.1 Memory Test
This test is used to check the operating status of the built-in memory.
Procedures
1. Press the
SUB
MENU
key.
2. Press the
9
key four times to open the INIT SET #4 menu.
3. Press the
3
key to open the DIAGNOSTIC 2 menu.
4. Press the
1
key to select "MEMORY TEST".
5. Press the
1
to
6
keys to start checking.
"OK" appears on the normally operated items.
Exit
6. Press the
SUB
MENU
key.
Memory Test
MEMORY TEST
0. PREVIOUS MENU
1. SRAM OK
2. GRAPHIC RAM
3. FLASH ROM OK
4. ATA COMMON RAM OK
5. CARD 1 OK
6. CARD 2 OK
To close this menu, press (SUB MENU) key.
GRAPHIC RAM
G0 OK
G1 OK
G1' OK
G2 OK
G3 OK
G4 OK
G5 OK
G5' OK
G6 OK
G7 OK
G7' OK
G8 OK
G9 OK
G9' OK
G10 OK
G11 OK

JRC JMA-7725-6 Specifications

General

Brand	JRC
Model	JMA-7725-6
Category	Marine Radar
Language	English