3-54
3
3.6 Display User Map
y
y y
Inserting a vertex into a line (Insert/Move Vertex)
With regard to the created user map, a vertex is inserted into a line.
Procedures 1 Open the Edit User Map menu by performing the following menu
operation.
U.Map
→ Edit User Map
The Edit User Map menu will appear.
2 Left-click the Insert/Move Vertex button.
The user map insert/correction mode is selected.
Add/Move VTX(SP) is displayed in the cursor mode located the upper right of the
radar display.
3 Put the cursor to a side line into which a vertex will be inserted, and
left-click.
A vertex is inserted into the selected line, and the cross cursor mark will be displayed.
4 Move the cross cursor mark to the newly inserted vertex, and left-click.
To insert another vertex, repeat procedures 3 and 4.
5 When finished with the correction of all items, left-click the Exit
button.
The cursor mode changes to the normal operation mode, terminating the user map
insertion/correction mode.
(Example)
Inserted vertex
The side line into which
a vertex is inserted
To Next Page
Loading...
Need help?
General
