2-20
2
2.3 Functions of Software Buttons
yy
Upper right of the display
①：Cursor bearing numeric value display true / relative switching
The bearing numeric value display T (true bearing) / R (relative bearing) of the cursor is switched
whenever this button is clicked.
②, ③, ④,and ⑤：EBL1 / 2 and VRM1 / 2 adjustment
These functions set the EBL1 , VRM1 , EBL2 , and VRM2 acquire the operation right.
When the button is clicked on, the operation right is acquired. Make adjustments by moving the track ball
to the left and right Determine the adjustment by left-clicking.
⑥and ⑦：EBL1, EBL2 numeric value true / relative switching
The EBL1 / 2 bearing numeric value display T (true bearing) / R (relative bearing) is switched
whenever the button is clicked.
When the button is clicked for 2 seconds, the EBL / Cursor Setting menu is displayed.
⑧，⑨，⑩and ⑪：EBL1, VRM1, EBL2 and VRM2 display switching
These functions set the EBL1 , VRM1 , EBL2 , and VRM2 displays to On / Off.
When the button is clicked on, the operation right is acquired.
To Next Page
Loading...
