JRC JMR-5425-7X - Pick Report (C-MAP MAX)

Section 9 Chart 9-6
9.2.4 Pick report (C-MAP MAX)
This function retrieves information from an object on a chart and displays it on the pick report screen.
When you right-click on a chart and then select [Readout Chart Information] from the displayed context
menu, the pick report screen is opened, enabling the checking of chart information.
The following contents are displayed on the pick report screen for C-MAP MAX.
[Object] tab
Item
Contents
Setting value
Geometry Select geometry. The display contents are filtered based
on the selected geometry.
All --- All the objects are displayed without filtering.
Point --- Only the point object is displayed.
Line --- Only the line object is displayed.
Area --- Only the area object is displayed.
All
Point
Line
Area
Object List
Picked Objects
Displays in the list the objects within the pick cursor.
-
Name Displays the name of the selected object. Point
Line
Area
Attribute List
Attribute Displays the attribute name of the object that has been
selected from the object list.
-
Value Displays the attribute value of the object that has been
selected from the object list. When the value is unknown,
“Unknown” is displayed.
-
[Legend] tab
Item
Contents
Setting value
Area Information List
Information Displays the area information of the point that has been
picked.
Scale
Depth Unit
Height Unit
Update Application
Date (UTC)
Position Referred To
Source Indication
Height Referred
Buoyage System
Value Displays the value of the area information. When the value
is unknown, “Unknown” is displayed.