JRC JMR-5425-7X - Setting Other Ships Radar Trails

13-9 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
13.5 Setting Other Ship’s Radar Trails
Set other ship’s radar trails.
[Operation procedure]
Display the radar trail setting screen by performing the following menu operations.
[Menu] button → Settings → Trails
The following table shows the setting items.
Setting Item Description of Setting Setting Value
Trails Mode Select a radar trail display mode. True / Relative
Trails Ref Level Set up a video level required to draw radar trails.
The higher the level gets, the higher the
threshold value for drawing radar trails becomes.
Level1 (Low)
Level2
Level3
Level4 (High)
Trails Reduction Set up the radar trail reduction processing level.
The higher the level gets, the stronger the
reduction processing level becomes.
Off
Level 1 (Wide)
Level2
Level3 (Narrow)
MAX Length
Select the maximum value of the time to display
radar trails.
Short / Long