JRC JMR-5425-7X - Setting Key Assignment

13-35 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
13.24 Setting Key Assignment
Set the keys on the operation unit and the functions that are assigned to the [MULTI] dial.
Only the items whose functions are available on the mode screen are displayed on the screen.
[Operation procedure]
Open the key assignment setting screen by performing the following menu operations.
[Menu] button → Settings → Key Assignment
[User Key] tab
Setting Item Description of Setting Setting Value
User Key1
Select a function to assign to the [USER1] key on the
operation unit.
When the [Detail] button is clicked on while the button is
enabled, the detail setting screen of the function that was
assigned is displayed.
Refer to a separate
table, “User key
list”.
User Key 2
Select a function to assign to the [USER2] key on the
operation unit. When the [Detail] button is clicked on
while the button is enabled, the detail setting screen of
the function that was assigned is displayed.
Same as above
[Multi Dial] tab
Setting Item Description of Setting Setting Value
Vector Time
When this is selected, the vector length setup function will be
manipulated with the [MULTI] control.
To enable: Select.
To disable: Clear.
Trails Length
When this is selected, the radar trail length setup function will
be manipulated with the [MULTI] control.
To enable: Select.
To disable: Clear.
C UP Angle When this is selected, the course adjustment function in the
course-up mode will be manipulated with the [MULTI] control.
To enable: Select.
To disable: Clear.
Own Track
Colour
When this is selected, the own ship track colour switch
function will be manipulated with the [MULTI] control.
To enable: Select.
To disable: Clear.
Mark/Line
Colour
When this item is enabled, the user map colour switching
function is operated by the [MULTI] dial.
To enable: Select.
To disable: Clear.
Manual Tune
When this is selected, the manual tuning function will be
manipulated with the [MULTI] control. In Slave (sub display)
mode, the item is not displayed.
To enable: Select.
To disable: Clear.
Display
Brightness
When this is selected, the display brightness adjustment
function will be manipulated with the [MULTI] control.
It cannot be changed since power is always on.
Always Enabled
Panel
Brightness
When this is selected, the operation unit brightness
adjustment function will be manipulated with the [MULTI]
control. This item is always displayed.
To enable: Select.
To disable: Clear.
Gain
When this item is enabled, the gain adjustment function is
operated by the [MULTI] dial. When the RADAR function can
be used, the item will be displayed.
To enable: Select.
To disable: Clear.
Sea
When this item is enabled, the sea adjustment function is
operated by the [MULTI] dial. When the RADAR function can
be used, the item will be displayed.
To enable: Select.
To disable: Clear.
Rain
When this item is enabled, the rain and snow adjustment
function is operated by the [MULTI] dial. When the RADAR
function can be used, the item will be displayed.
To enable: Select.
To disable: Clear.