JRC JMR-5425-7X - Checking the GPS Status

15-3 Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27
[Specification] tab
The [Specification] tab displays the equipment licence information when the equipment licence is
available.
Item Displayed information
Equipment licence
information
Displays the licence standard of the equipment licence.
Save to USB Device
When this button is clicked on, the contents that are displayed are
saved in the USB memory device in text format.
15.1.3 Checking the GPS status
[Operation procedure]
Confirm the GPS Status by performing the following menu operations.
[Menu] button → Maintenance → GPS Status
The following contents are displayed.
Item
Displayed information
Date/Time (UTC) Displays the date and time when information is received from GPS.
LAT / LON Displays the latitude and longitude.
Altitude Displays the antenna altitude.
Fix Mode Displays the position fixing mode. One of No Fix, 2D, and 3D is
displayed.
DOP Level Displays the HDOP level.
RAIM Level Displays the RAIM level.
Displays one of 10 m/30 m/50 m/100 m/Off.
WER Displays the beacon signal error rate.
RSSI Displays the signal strength.
RAIM Status Displays the RAIM status.
Displays one of Safe/Caution/Unsafe/No Fix.
Fix Status Displays the position fixing status.
Displays one of No Fix/GPS/DGPS.
Ver. Displays the ROM version. The content displayed is R26.00 and so on.
The following table shows the contents displayed in the satellite information list section.
Item Displayed information
System Displays the satellite positioning system.
Displays one of GPS/QZSS/BDS/GLONASS/Galileo.
Satellite No. Displays the visible satellite number.
Fix Displays the satellite positioning status.
Displays one of Use/Demodulation/Non-Demodulation/None-use.
Azimuth Displays the azimuth angle.
Elevation Displays the elevation angle.
Level Displays the SNR signal strength.