JRC JSS-2150 - Peripheral Interfaces

CONFIGURATION AND SPECIFICATIONS
1-9
1.3.3 Peripheral interfaces
(1) GPS or other navigation aid interface
Interface standard NMEA0183/IEC61162-1 compliant
Protocol 4800 bps, start 1 bit, data 8 bit, stop 1 bit
Non parity
Input sentence NMEA0183 V1.5 : GGA/GLL/RMC
V2.0 : GGA/GLL/RMC/ZDA
V2.3 : GGA/GLL/RMC/GNS/ZDA
（Talker = "GP" or other）
Data type Ship position & time information : GGA/GNS/GLL/RMC
Date information : ZDA/RMC
Equipment time information : ZDA/GGA/GNS/GLL/RMC
(2) RMS interface
Interface standard IEC61162-1 compliant
Protocol 4800 bps, start 1 bit, data 8 bit, stop 1 bit
Non parity
Output message IEC61162-1 compliant proprietary sentence
$PJRCL sentence (for RMS log saving)
$PJRCM sentence
(Device ID = "CT")
Data type Model number, serial number, self-diagnosis information, etc.
(3) Accessory interface
DC_OPE Input circuit : Current loop (Photo coupler)
Input current(between a and b) : 4.4mA (DC24V)
+BK Output voltage (normal) : DC24V
Maximum output : 0.5A
-BK ・Input
Input current : 2mA
・Output
Maximum output current : 0.5A
RBK Maximum output current : 1.5A
EXT_KEY Input current : 2mA
SEL_BK Input current : 2mA
RBK（NCM-2150/ EXT MODEM） Maximum output current : 0.3A