JUKI TR6SNV - Replacement of Automatic Width Adjustment Motor (Optional: Automatic Width Adjustment)

Maintenance Guide
5-7
5-7. Replacement of automatic width adjustment motor
(optional: automatic width adjustment)
Detach the C cover B6S and replace the motor.
Using the screw (A), remove the motor together with the bracket, and use the screw (B) to
remove the motor .
Make assembly so that the pulley (C) and the motor axis will be on a plane.
When the replacement is finished, execute belt tension adjustment.
 Automatic width adjustment motor (part No.: 40045712)
Same plane
(8.1mm)