JUKI TR6SNV - Replacement of BGA Cylinder

Maintenance Guide
7-14
7-14. Replacement of BGA cylinder
Remove the S saucer and remove the holder arm B (A), and replace the cylinder.
Assemble the SBGA cylinder plate (B) so that the dimension in Fig. 1 will be attained (screw lock:
Three Bond 1401C)
Assemble the holder arm B so that (A) BGA holder (C) will be parallel.
 SBGA cylinder plate (part No.: PA0402001A0)
The two lines must be
parallel to each other.
The two lines must be
parallel to each other.
Fig. 1
Fig. 2
7.5