Julabo CORIO CD-900F - Page 37

Operation via the USB or RS232 interface
37
Factory setting of the interface parameter
BAUDRATE
4800 Bd
PARITY
even parity
HANDSHAKE
none
Datenbits
7
Stopbit
1
Selection of the interface and parameter settings
IntE
rEN
con
1. Select menu IntE.
2. Press .
3. Select rEN or conwith or , confirm with .
In submenu
rEN the following ist adjustable:
1. Select interfasce 232, Usb or OFF with oder .
2. Press to confirm (The display flashes briefly)
In submenu
con the following is adjustable:
1. Select bAud, Hand or Pari with or .
bAud for setting the baudrate
1. Press
2. Select with or the baudrates (1.2; 2.4; 4.8; 9.6;
19.2; 38.4; 57.6; 115.2)
3. Confirm with
( (The display flashes briefly).).
Hand for setting the dataflow
1. Press .
2. Select with or nonE, SOFt or Hard
3. Confirm with (The display flashes briefly).
Pari for setting the parity
1. Press .
2. Select with or nonE (none), odd (odd) or
EvEn (even)
3. Confirm with (The display flashes briefly).