Jungheinrich EJC 112 User Manual

1004.GB
C 2
3 Operating the truck without its own drive system
F
This operating mode is not permitted when negotiating inclines and gradients.
To operate the truck in emergency conditions, the electromagnetically applied brake
must be released.
– Remove the front panel (2) (see Chapter F).
– Remove the right-hand drive panel (3) (see Chapter F).
– Screw on 2 off M5 bolts (4) to loosen the armature plate.
The truck can now be moved.
M
When you park the truck, the screws (4) must be turned back clockwise as far as the
stop to restore full braking capability.
2
3
4
1004.GB
C 2
3 Operating the truck without its own drive system
F
This operating mode is not permitted when negotiating inclines and gradients.
To operate the truck in emergency conditions, the electromagnetically applied brake
must be released.
– Remove the front panel (2) (see Chapter F).
– Remove the right-hand drive panel (3) (see Chapter F).
– Screw on 2 off M5 bolts (4) to loosen the armature plate.
The truck can now be moved.
M
When you park the truck, the screws (4) must be turned back clockwise as far as the
stop to restore full braking capability.
2
3
4

Jungheinrich EJC 112 Specifications

General

Brand	Jungheinrich
Model	EJC 112
Category	Lifting Systems
Language	English