0307.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard = t WA BC
Chassis/
Structure:
1.1 Check all load bearing components for damage t
1.2 Check screw connections t
Drive: 2.1 Check transmission for noise and leakage t
2.2 Check transmission oil level t
2.3 Change transmission oil
Wheels: 3.1 Check wheels for wear and damage t
3.2 Check the bearings and attachment t
Steering: 4.1 Check the steering wheel play t
Brake
system:
5.1 Test operation and settings t
5.2 Check gas pressure springs recuperate, are sealed and
not damaged
t
5.3 Check the brake lining wear t
5.4 Check brake mechanism, adjust and lubricate if
necessary
t
Mast: 6.1 Visually inspect rollers, slide pieces and stops t
6.2 Check forks and fork carriage for wear and damage t
6.3 Check mast attachment t
6.4 Check lift chains and guides for wear, adjust and
lubricate.
t
6.5 Check lateral slack and ensure mast sections are
parallel
t
6.6 Check protective mechanisms for damage and make
sure they are secure
t
Hydraulic
System:
7.1 Test operation t
7.2 Check connections and ports for leaks and damage t
7.3 Check hydraulic cylinder for leaks and damage and
make sure it is secure
t
7.4 Check oil level t
7.5 Replace hydraulic oil t
7.6 Replace filter t
7.7 Test pressure relief valves t
0307.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard = t WA BC
Chassis/
Structure:
1.1 Check all load bearing components for damage t
1.2 Check screw connections t
Drive: 2.1 Check transmission for noise and leakage t
2.2 Check transmission oil level t
2.3 Change transmission oil
Wheels: 3.1 Check wheels for wear and damage t
3.2 Check the bearings and attachment t
Steering: 4.1 Check the steering wheel play t
Brake
system:
5.1 Test operation and settings t
5.2 Check gas pressure springs recuperate, are sealed and
not damaged
t
5.3 Check the brake lining wear t
5.4 Check brake mechanism, adjust and lubricate if
necessary
t
Mast: 6.1 Visually inspect rollers, slide pieces and stops t
6.2 Check forks and fork carriage for wear and damage t
6.3 Check mast attachment t
6.4 Check lift chains and guides for wear, adjust and
lubricate.
t
6.5 Check lateral slack and ensure mast sections are
parallel
t
6.6 Check protective mechanisms for damage and make
sure they are secure
t
Hydraulic
System:
7.1 Test operation t
7.2 Check connections and ports for leaks and damage t
7.3 Check hydraulic cylinder for leaks and damage and
make sure it is secure
t
7.4 Check oil level t
7.5 Replace hydraulic oil t
7.6 Replace filter t
7.7 Test pressure relief valves t
To Next Page
Loading...
Need help?
General
