To Next Page

To Previous Page

F 7

0307.GB

5.1 Fuels, coolants and lubricants

Handling consumables: Consumables must always be handled correctly. Follow

the manufacturer’s instructions.

Improper handling is hazardous to health, life and the environment. Consumables

must only be stored in appropriate containers. They may be flammable and must

therefore not come into contact with hot components or naked flames.

Only use clean containers when filling up with consumables. Do not mix consumables

of different grades. The only exception to this is when mixing is expressly stipulated

in the Operating Manual.

Avoid spillage. Spilled liquids must be removed immediately with suitable bonding

agents and the bonding agent / consumable mixture must be disposed of in

accordance with regulations.

Code Order no. Quantity Description Used for

A 29 200 670 5.0 l H-LP 46, DIN 51524 Hydraulic system

B 50380904 5.0 l Fuchs Titan Gear

HSY 75W-90

Transmission

E 29 201 430 1.0 kg Grease, DIN 51825 Lubrication

G 29 201 280 0.4 l Chain spray Chains

Code Saponification Dew point

°C

Worked penetr.

at 25°C

NLG1

class

Service

temperat.

Application

Temperature °C

E Lithium 185 265 - 295 2 -35 / +120

F 7