Jungheinrich EJC 112 User Manual

0606.GB
E 6
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Visually inspect the battery attachment and cable connections.
Switching on the truck
– Make sure the battery is connected (1).
– Insert the key in the key switch (2) and turn it to the right as far as it will go (position
“I”) or for CANCODE (3, o) enter the release code.
(see section 5).
– Test the warning signal switch (11).
The truck is now operational.
o The battery discharge indicator (4) indicates the current battery charge status.
– Test the braking operation of the tiller (5) (see section 4.2).
2
3
4
5
1
11
0606.GB
E 6
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Visually inspect the battery attachment and cable connections.
Switching on the truck
– Make sure the battery is connected (1).
– Insert the key in the key switch (2) and turn it to the right as far as it will go (position
“I”) or for CANCODE (3, o) enter the release code.
(see section 5).
– Test the warning signal switch (11).
The truck is now operational.
o The battery discharge indicator (4) indicates the current battery charge status.
– Test the braking operation of the tiller (5) (see section 4.2).
2
3
4
5
1
11

Jungheinrich EJC 112 Specifications

General

Brand	Jungheinrich
Model	EJC 112
Category	Lifting Systems
Language	English