Jungheinrich EJC 112 User Manual

D 7
0606.GB
4.2 Charging the battery with a stationary charger o
– Park the truck securely (see Chapter E).
M
Only connect and disconnect the battery connector and the socket when the mains
and charger are switched off.
– Expose the battery (see Section 3).
F
When charging, the tops of the battery cells must be exposed to provide sufficient
ventilation. Do not place any metal objects on the battery. Before charging, check all
cables and plug connections for visible signs of damage.
All safety instructions as provided by the battery supplier and battery charger supplier
must be strictly observed.
– Where necessary remove the insulating mat from the battery.
– Connect the charging cable (7) of the battery charging station to the battery
connector (1) and switch on the charger.
M
Charge the battery in accordance with the battery and charging station
manufacturers’ instructions.
D 7
0606.GB
4.2 Charging the battery with a stationary charger o
– Park the truck securely (see Chapter E).
M
Only connect and disconnect the battery connector and the socket when the mains
and charger are switched off.
– Expose the battery (see Section 3).
F
When charging, the tops of the battery cells must be exposed to provide sufficient
ventilation. Do not place any metal objects on the battery. Before charging, check all
cables and plug connections for visible signs of damage.
All safety instructions as provided by the battery supplier and battery charger supplier
must be strictly observed.
– Where necessary remove the insulating mat from the battery.
– Connect the charging cable (7) of the battery charging station to the battery
connector (1) and switch on the charger.
M
Charge the battery in accordance with the battery and charging station
manufacturers’ instructions.

Jungheinrich EJC 112 Specifications

General

Brand	Jungheinrich
Model	EJC 112
Category	Lifting Systems
Language	English