Jungheinrich EJC 112 User Manual

0606.GB
E 4
Item Control /
Display
EJC 110 EJC 112 Function
7 Controller ttControls travel direction and speed.
8 Collision safety
switch
ttTruck moves away from the operator
and stops.
9 Load fork raise
switch
ttRaises load forks.
The lift speed can be infinitely
controlled via the switch stroke
(8 mm).
10 Load fork lower
switch
ttLowers the load forks.
The lowering speed can be infinitely
controlled via the switch stroke
(8 mm).
11 Warning signal
(horn) switch
ttTriggers a warning signal.
12 Integrated charger ttUsed to charge the battery
(see Chapter D).
13 Charging display
on charger
ttIndicate the charge status
(see Chapter D).
t = Standard equipment o = Optional Equipment
0606.GB
E 4
Item Control /
Display
EJC 110 EJC 112 Function
7 Controller ttControls travel direction and speed.
8 Collision safety
switch
ttTruck moves away from the operator
and stops.
9 Load fork raise
switch
ttRaises load forks.
The lift speed can be infinitely
controlled via the switch stroke
(8 mm).
10 Load fork lower
switch
ttLowers the load forks.
The lowering speed can be infinitely
controlled via the switch stroke
(8 mm).
11 Warning signal
(horn) switch
ttTriggers a warning signal.
12 Integrated charger ttUsed to charge the battery
(see Chapter D).
13 Charging display
on charger
ttIndicate the charge status
(see Chapter D).
t = Standard equipment o = Optional Equipment

Jungheinrich EJC 112 Specifications

General

Brand	Jungheinrich
Model	EJC 112
Category	Lifting Systems
Language	English