0606.GB
E 22
Comments
Z
For trucks without a display instrument (CANDIS (o)) the CODE lock parameters can
only be set by the manufacturer's service department.
The parameters are set in the same way as for the travel parameters.
The following parameters may be entered.
Setting 0 / 1 is to be interpreted as: 0 = off 1 = on
No. Function Setting Range Standard
Setting
Comments
Travel program 3
301 Acceleration 0 - 9
(0.2 - 2.0 m/s
2
)
4
(1.0 m/s
2
)
302 Coasting brake 0 - 9
(0.2 - 2.0 m/s
2
)
6
0.8 m/s
2
)
304 Maximum speed in tiller
direction via travel switch
0 - 9
(2.8 - 6.2 km/h)
8
(6.0 km/h)
depending on
controller
308 Maximum speed in fork
direction via travel switch
0 - 9
(2.8 - 6.2 km/h)
8
(6.0 km/h)
depending on
travel switch
No. Function Range of
Setting
Standard
Setting
Comments
Comments
411 Battery parameters
Battery type (normal/
high-power/dry)
0 - 2 0 0 = Normal (wet)
1 = High-power (wet)
2 = Dry
(maintenance-free)
412 Discharge monitor
function
0 / 1 1
0606.GB
E 22
Comments
Z
For trucks without a display instrument (CANDIS (o)) the CODE lock parameters can
only be set by the manufacturer's service department.
The parameters are set in the same way as for the travel parameters.
The following parameters may be entered.
Setting 0 / 1 is to be interpreted as: 0 = off 1 = on
No. Function Setting Range Standard
Setting
Comments
Travel program 3
301 Acceleration 0 - 9
(0.2 - 2.0 m/s
2
)
4
(1.0 m/s
2
)
302 Coasting brake 0 - 9
(0.2 - 2.0 m/s
2
)
6
0.8 m/s
2
)
304 Maximum speed in tiller
direction via travel switch
0 - 9
(2.8 - 6.2 km/h)
8
(6.0 km/h)
depending on
controller
308 Maximum speed in fork
direction via travel switch
0 - 9
(2.8 - 6.2 km/h)
8
(6.0 km/h)
depending on
travel switch
No. Function Range of
Setting
Standard
Setting
Comments
Comments
411 Battery parameters
Battery type (normal/
high-power/dry)
0 - 2 0 0 = Normal (wet)
1 = High-power (wet)
2 = Dry
(maintenance-free)
412 Discharge monitor
function
0 / 1 1
To Next Page
Loading...
Need help?
General
