Juniper E Series - Page 183

SRP I/O Module ! 165
Appendix A: Cable Pinouts
Figure 56: SRP I/O module Ethernet port
Table 36 lists the pinouts for the Ethernet cable’s RJ-45 connector.
To facilitate connecting the system to a terminal, the system is shipped with one of
each of the following cable adapters:
! DB-9 female to RJ-45 female crossover null modem adapter
! DB-9 female to RJ-45 female straight-through adapter
Table 37 lists the pinouts for the crossover adapter.
CONSOLE
10/100
BASE T
RS-232
PIN 1
PIN 8
PIN 1
PIN 8
RJ-45
g013772
Table 36: SRP I/O module – RJ-45 connector pinout
Pin Signal
1TX +
2TX –
3RX +
4 no connect
5 no connect
6RX –
7 no connect
8 no connect