Juniper EX9200

instance
Syntax instance {
instance-name {
input {
maximum-packet-length bytes;
rate number;
run-length number;
}
family (ccc| inet | inet6 | mpls | vpls) {
output {
interface interface-name {
next-hop address;
}
no-filter-check;
server-profile server-profile-name;
}
}
}
}
Hierarchy Level [edit forwarding-options port-mirroring],
[edit routing-instances routing-instance-name forwarding-options port-mirroring]
Release Information Statement introduced in Junos OS Release 9.3 (MX Series routers only).
Support extended to M120 and M320 routers in Junos OS Release 9.5.
maximum-packet-length and ccc options introduced in Junos OS Release 9.6 for M120
and M320 routers only.
server-profile option introduced in Junos OS Release 13.2 for PTX Series Packet Transport
Routers only.
Description Configure a port-mirroring instance.
Options port-mirroring-instance-name—Name of the port-mirroring instance.
The remaining statements are explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control-level—To add this statement to the configuration.
Related
Documentation
• Configuring Port Mirroring
• Configuring Active Flow Monitoring on PTX Series Packet Transport Routers
Copyright © 2016, Juniper Networks, Inc.104
Port Mirroring Feature Guide for EX9200 Switches