Juniper EX9200

show forwarding-options port-mirroring
Syntax show forwarding-options port-mirroring
<terse | detail>
<instance-name>
Release Information Command introduced in Junos OS Release 9.6.
Command introduced in Junos OS Release 12.3R2 for EX Series switches.
Description Display current state of port-mirroring instances.
Options terse | detail—(Optional) Display the specified level of output.
instance-name—(Optional) Display a single port-mirroring instance.
Required Privilege
Level
view
Related
Documentation
List of Sample Output show forwarding-options port-mirroring terse on page 411
show forwarding-options port-mirroring detail on page 411
Output Fields Table 11 on page 410 lists the output fields for the show forwarding-options port-mirroring
command. Output fields are listed in the approximate order in which they appear.
Table 11: show forwarding-options port-mirroring Output Fields
Level of OutputField DescriptionField Name
All levelsName of port-mirroring instance.Instance Name
All levelsInstance identification number.Instance Id
All levelsInstance state, either up or down.State
Input parameters
detailRate (ratio of packets sampled).Rate
detailRun length (number of consecutive packets sampled).Run-length
detailMaximum packet length.Maximum-packet-length
Output parameters
detailProtocol family.Family
detailInstance state, either up or down.State
detailDestination (next-hop group name).Destination
Copyright © 2016, Juniper Networks, Inc.410
Port Mirroring Feature Guide for EX9200 Switches