Juniper EX9200

show firewall
List of Syntax Syntax on page 416
Syntax (EX Series Switches) on page 416
Syntax show firewall
<counter counter-name>
<detail>
<filter (filter-name | regex regular-expression)>
<log>
<logical-system (all | logical-system-name)>
<terse>
Syntax (EX Series
Switches)
show firewall
<counter counter-name>
<detail>
<filter filter-name>
<log <(detail | interface interface-name)>>
<policer counters <(detail | counter-id counter-index <detail>)>>
<terse>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Option logical-system introduced in Junos OS Release 9.3.
Option terse introduced in Junos OS Release 9.4.
Option policer counters introduced in Junos OS Release 12.2 for EX Series switches.
Option detail introduced in Junos OS Release 12.3 for EX Series switches.
Option detail introduced in Junos OS Release 14.1 for MX Series routers.
Option regex regular-expression introduced in Junos OS Release 14.2.
Description Display enhanced statistics and counters for all configured firewall filters.
Options none—(Optional) Display statistics and counters for all configured firewall filters and
counters. For EX Series switches, this command also displays statistics about all
configured policers.
counter counter-name—(Optional) Name of a filter counter.
detail—(EX Series switches and MX Series routers only) (Optional) Display firewall filter
statistics and enhanced policer statistics and counters.
filter filter-name—(Optional) Name of a configured filter.
filter regex regular-expression—(Optional) Regular expression that matches the names
of a subset of filters.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all logical
systems or on a particular logical system.
log—(Optional) Display log entries for firewall filters.
Copyright © 2016, Juniper Networks, Inc.416
Port Mirroring Feature Guide for EX9200 Switches