log <(detail | interface interface-name)>—(EX Series switches only) (Optional) Display
detailed log entries of firewall activity or log information about a specific interface.
policer counters <(detail | counter-id counter-index <detail>)>—(EX8200 switches only)
(Optional) Display enhanced policer counter statistics in brief or in detail.
terse—(Optional) Display firewall filter names only.
Required Privilege
Level
view
Related
Documentation
clear firewall on page 414•
• show firewall log on page 423
• Verifying That Firewall Filters Are Operational
• Verifying That Policers Are Operational
• show policer
• Enhanced Policer Statistics Overview
• enhanced-policer
List of Sample Output show firewall filter (MX Series Router and EX Series Switch) on page 420
show firewall filter (non MX Series Router and EX Series Switch) on page 420
show firewall filter (Dynamic Input Filter) on page 420
show firewall (Logical Systems) on page 420
show firewall (counter counter-name) on page 421
show firewall log on page 421
show firewall policer counters (EX8200 Switch) on page 421
show firewall policer counters (detail) (EX8200 Switch) on page 421
show firewallpolicer counters(counter-id counter-index) (EX8200 Switch) on page 422
show firewall policer counters (counter-id counter-index detail) (EX8200
Switch) on page 422
show firewall detail on page 422
Output Fields Table 12 on page 418 lists the output fields for the show firewall command. Output fields
are listed in the approximate order in which they appear.
417Copyright © 2016, Juniper Networks, Inc.
Chapter 15: Operational Commands: Firewall Filter Statistics and Logs
To Next Page
