show firewall log
List of Syntax Syntax on page 423
Syntax (EX Series Switches) on page 423
Syntax show firewall log
<detail>
<extensive>
<interface interface-name>
<logical-system (logical-system-name | all)>
Syntax (EX Series
Switches)
show firewall log
<detail>
<interface interface-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
extensive option introduced in Junos OS Release 16.1.
logical-system option introduced in Junos OS Release 9.3.
Description Display log information about firewall filters.
Options none—Display log information about firewall filters.
detail—(Optional) Display detailed information.
extensive—(Optional) Display hex dump of packet captured by log action.
interface interface-name—(Optional) Display log information about a specific interface.
logical-system (logical-system-name | all)—(Optional) Perform this operation on all logical
systems or on a particular system.
Required Privilege
Level
view
List of Sample Output show firewall log on page 424
show firewall log detail on page 424
show firewall log extensive on page 425
Output Fields Table 13 on page 423 lists the output fields for the show firewall log command. Output
fields are listed in the approximate order in which they appear.
Table 13: show firewall log Output Fields
Field DescriptionField Name
Time that the event occurred.Time of Log
423Copyright © 2016, Juniper Networks, Inc.
Chapter 15: Operational Commands: Firewall Filter Statistics and Logs
To Next Page
Loading...
Need help?
General
