To Next Page

To Previous Page

show forwarding-options port-mirroring

Syntax show forwarding-options port-mirroring

<instance-name>

Release Information Command introduced in Junos OS Release 9.6.

Statement introduced in Junos OS Release 12.3R2 for EX Series switches.

Hierarchy level [edit forwarding-options] introduced in Junos OS Release 13.2X50-D10

(ELS).

Description Display current state of port-mirroring instances.

Options terse | detail—(Optional) Display the specified level of output.

instance-name—(Optional) Display a single port-mirroring instance.

Required Privilege

Level

view

Documentation

List of Sample Output show forwarding-options port-mirroring terse on page 429

show forwarding-options port-mirroring detail on page 429

Output Fields Table 11 on page 410 lists the output fields for the show forwarding-options port-mirroring

command. Output fields are listed in the approximate order in which they appear.

Table 14: show forwarding-options port-mirroring Output Fields

Level of OutputField DescriptionField Name

All levelsName of port-mirroring instance.Instance Name

All levelsInstance identification number.Instance Id

All levelsInstance state, either up or down.State

Input parameters

detailRate (ratio of packets sampled).Rate

detailRun length (number of consecutive packets sampled).Run-length

detailMaximum packet length.Maximum-packet-length

Output parameters

detailProtocol family.Family

detailInstance state, either up or down.State

Port Mirroring Feature Guide for EX9200 Switches

Juniper EX9200 Features Guide

Other manuals for Juniper EX9200