Juniper EX9200

Table 14: show forwarding-options port-mirroring Output Fields (continued)
Level of OutputField DescriptionField Name
detailDestination (next-hop group name).Destination
Sample Output
show forwarding-options port-mirroring terse
user@switch> show forwarding-options port-mirroring terse
Instance Name Instance Id State
&global_instance 1 up
inst1 2 up
show forwarding-options port-mirroring detail
user@switch> show forwarding-options port-mirroring detail
Instance Name: &global_instance
Instance Id: 1 State: up
Input parameters:
Rate: 1
Run-length: 0
Maximum-packet-length: 0
Output parameters:
Family: ethernet-switching State: up Destination: ge-0/0/10.0
Instance Name: inst1
Instance Id: 2 State: up
Input parameters:
Rate: 1
Run-length: 0
Maximum-packet-length: 0
Output parameters:
Family: ethernet-switching State: down Destination: ge-0/0/10.0
429Copyright © 2016, Juniper Networks, Inc.
Chapter 16: Operational Commands: Next-Hop Groups for Layer 2 Port Mirroring