Juniper EX9200 Features Guide

CHAPTER 3
Behavior of Layer 2 Port Mirroring of
Logical Interfaces on PE Routers
•
Layer 2 Port Mirroring of PE Router or PE Switch Logical Interfaces on page 13
•
Layer 2 Port Mirroring of PE Router or PE Switch Aggregated Ethernet
Interfaces on page 15
Layer 2 Port Mirroring of PE Router or PE Switch Logical Interfaces
For a router or switch configured as a provider edge (PE) device on the customer-facing
edge of a service provider network, you can apply a Layer 2 port-mirroring firewall filter
at the following ingress and egress points to mirror the traffic between the router or
switch and customer edge (CE) devices, which are typically also routers and Ethernet
switches.
Table 4 on page 14 describes the ways in which you can apply Layer 2 port-mirroring
firewall filters to a router or switch configured as a PE device.
13Copyright © 2016, Juniper Networks, Inc.

Juniper EX9200 Specifications

General

Brand	Juniper
Model	EX9200
Category	Network Router
Language	English