Juniper EX9200

logical-system logical-system-name—Clear the packet and byte counts for the specified
logical system.
policer counter (all | counter-id counter-index)—(EX8200 switches only) Clear all policer
counters using the policer counter all command, or clear a specific policer counter
using the policer counter counter-id counter-index command. The value of
counter-index can be 0, 1, or 2.
Required Privilege
Level
clear
Related
Documentation
show firewall on page 416•
List of Sample Output clear firewall all on page 415
clear firewall (counter counter-name) on page 415
clear firewall (filter filter-name) on page 415
clear firewall (policer counter all) (EX8200 Switch) on page 415
clear firewall (policer counter counter-id counter-index) (EX8200 Switch) on page 415
Sample Output
clear firewall all
user@host> clear firewall all
clear firewall (counter counter-name)
user@host> clear firewall counter port-filter-counter
clear firewall (filter filter-name)
user@host> clear firewall filter ingress-port-filter
clear firewall (policer counter all) (EX8200 Switch)
user@switch> clear firewall policer counter all
clear firewall (policer counter counter-id counter-index) (EX8200 Switch)
user@switch> clear firewall policer counter counter-id 0
415Copyright © 2016, Juniper Networks, Inc.
Chapter 15: Operational Commands: Firewall Filter Statistics and Logs