Juniper EX9200

Sample Output
show forwarding-options port-mirroring terse
user@host> show forwarding-options port-mirroring terse
Instance Name Instance Id State
&global_instance 1 up
inst1 2 up
show forwarding-options port-mirroring detail
user@host> show forwarding-options port-mirroring detail
Instance Name: &global_instance
Instance Id: 1 State: up
Input parameters:
Rate: 10
Run-length: 4
Maximum-packet-length: 0
Output parameters:
Family: inet State: up Destination: inet_nhg
Family: vpls/eth-switch State: up Destination: vpls_nhg
Instance Name: inst1
Instance Id: 2 State: up
Input parameters:
Rate: 1
Run-length: 0
Maximum-packet-length: 200
Output parameters:
Family: inet State: up Destination: inet_nhg
Family: vpls/eth-switch State: down Destination: vpls_nhg_2
411Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Operational Commands: Layer 2 Port-Mirroring Instances